Buying a Used Cat 140M Grader: Specs, Prices & Hours

  • Editorial Team
  • Caterpillar Motor Graders
  • 16 November 2026

A used CAT 140m grader for sale is suitable for road maintenance, site preparation, and finish grading, but the badge alone does not determine value. The family includes three generations, each with its own set of engines and emissions systems. Current asking prices range between $50,000 and more than $200,000. Identify the generator first, then compare hours to service records and verify the emissions system before negotiating.

Which Cat 140M is it: 140M, 140M2, or 140M3?

Generation affects maintenance and resale. Verify the serial number with a Cat dealer; model year is only a clue.

Version Approx. years Engine and emissions Buyer impact
140M 2008–2011 C7 ACERT; Tier 3 Simpler emissions package; check age-related wear.
140M2 2011–2014 C9.3 ACERT; Tier 4 Interim Check DPF history and regeneration faults.
140M3 2014–2019 C9.3 ACERT; Tier 4 Final, SCR/DEF Inspect DPF, DEF lines and aftertreatment records.

Serial clues: B9 commonly marks 140M, M9/R9 mark M2, and N9 marks M3. AWD prefixes vary; confirm the serial with a Cat dealer.

What Are The Key CAT 140M Specs?

For the original 140M, Cat lists 183 hp base and 183–218 hp VHP Plus. Verify by serial number.

  • Engine: C7 ACERT on 140M; C9.3 ACERT on M2/M3.
  • Transmission: Powershift, eight forward and six reverse speeds.
  • Travel speed: Up to about 29 mph forward.
  • Moldboard: 12 ft standard; 14 ft blades are common on used units.
  • Fuel: The original 140M capacity is 110 gallons; later models differ.

Compare our 140M versus 140 LVR guide before choosing a setup.

How Much Does a Used CAT 140M Cost?

There is no fixed cat 140m grader price. November 2026 listings show asking prices, not verified sale results.

Generation Asking-price examples What the comparison suggests
140M 2008: $99,500 at 9,831 hours 

2009: $65,000 at 10,083 hours

Condition and attachments can outweigh a small hour difference.
140M2 2012: $79,000 at 10,000 hours

2014 AWD: $88,000 at 12,721 hours

AWD and included equipment affect value.
140M3 2018 AWD: $115,000 at 11,536 hours

2019: $205,647 at 5,627 hours

Lower hours and configuration may command a premium.


Note: All the prices mentioned in the above table have been taken and verified from the below-mentioned sources.

A used cat 140m for sale should be judged over a year. The price includes hours, AWD, grade control, tires, blade, ripper, servicing, and freight. 

Check the listings for used cat 140m for sale to see if GPS is fitted or merely “grade-control ready.” Compare delivery costs. The M3’s Tier 4 Final system is important where emissions regulations need it; budget for DEF and diagnostics.

How Many Hours Is Too Many on a CAT 140M?

No single cutoff applies. Treat these bands as editorial guidance, then compare hours with age, records, and machine condition:

  • Below 6,000 hours: low for an older M Series machine; verify the meter.
  • 6,000 – 10,000: common working range; focus on service quality.
  • 10,000–15,000: budget for major component and emissions work.
  • Above 15,000: require documented rebuilds and a strong inspection.

About 1,000 hours yearly is a screening benchmark, not a rule. Ask when the engine, transmission, tandems, circle, and DPF were serviced. Hours without invoices tell half the story. A 12-year-old grader at 7,000 hours differs from a newer one at 7,000. Read our hour-meter rollback guide.

What Should You Check Before Buying a Used 140M?

  • Read the report based on the repair cost. On M2/M3, check aftertreatment codes and DPF hours; on M3, inspect DEF lines and heat shields. 
  • Request a diagnostic download and inquire as to which codes are currently active.
  • Evaluate the circle and drawbar across their whole range. 
  • Check for backlash, teeth, cracks, and movement. Operators have reported costly bent-circle problems, but forum entries do not represent failure rates. 
  • Examine tandem cases, chains, planetaries, and seals. On AWD machines, test the drive motors and inquire about charge-pump repairs.
  • Wear should be consistent with the meter, including blade guides, edges, tires, articulation pins, controls, and welds. Request Cat ET status, product link information, fluid samples, and bills. 
  • Walk away from unexplained hours, missing records, and active leaks.

Check out our 25-point inspection checklist for used motor grader. Read comments and photographs, not just red/amber/green grades: a “fair” component may still be useable today but will require a costly repair.

Where Should You Buy a Used CAT 140M?

Dealers may offer inspections and support; auctions can lower price but raise risk; specialists can match configuration, freight, and financing. Compare title checks, export documents, and post-sale support. Explore & review our used CAT 140M motor graders after verifying condition. Confirm who pays for loading, freight, port handling, and repairs.

Closing: Buy the condition, not just the model.

Contact usedmotorgrader.com for a free serial number review, known service points, and matching inventory. Compare Caterpillar 140 motor graders in Houston, then get an inspection and delivery quote. Avoid making decisions only based on pricing. Also, if you have other specific model and brand requirements for used motor graders, you can check our inventory of high-performing, well-maintained graders for your specific project requirements.

FAQs

Does the 140M have a DPF or DEF system?

The original is Tier 3; M2 has a DPF; M3 adds SCR and DEF under Tier 4 Final.

Is AWD worth extra?

It helps on soft surfaces, but test motors, pumps, and repair history before paying extra.

How can I verify hours?

Compare the meter with Cat ET, Product Link, invoices, photos, and wear patterns.

Which generation is best?

Choose the best-documented machine that fits emissions rules, service access, and repair budget. A well-maintained M2 may be a better buy than a neglected M3.