Komatsu Motor Graders for Sale: GD655-6 Specs, Price, and Hours

  • Editorial Team
  • feature
  • 19 November 2026

A grader’s hour meter is the first number most buyers check and the least reliable one to judge on its own. Two used Komatsu GD655-6 machines can show nearly the same hours and sit thousands of dollars apart, because one was serviced on schedule and the other was not.

That is why a search for a Komatsu GD655-6 for sale is really three questions at once: what the machine can do, what the market is asking for it, and what its hours actually mean. The GD655-6 is Komatsu’s 14-foot, 218-horsepower mid-size grader, built to Tier 4 Final emissions standards for road construction, maintenance, and finish work. Below we cover verified GD655-6 specs, current U.S. pricing evidence, and how to read the 9,288 hours on our 2016 unit.

Komatsu GD655-6 Specifications: Engine, Power, Weight, and Blade

The Komatsu GD655-6 is a mid-size motor grader powered by a six-cylinder Komatsu SAA6D107E-3 diesel and an eight-speed forward, four-speed reverse dual-mode powershift transmission. These GD655-6 specs come from Komatsu’s GD655-6 product page.

Specification GD655-6
Engine SAA6D107E-3, 6.69 L, turbocharged, cooled EGR, EPA Tier 4 Final
Net horsepower 218 hp (163 kW) at 2,100 rpm in gears 7–8; 180 hp in gears 1–3
Gross horsepower 221 hp (165 kW)
Maximum torque 694 lb-ft at 1,450 rpm
Operating weight 37,346 lb; 41,667 lb with rear ripper and push plate
Moldboard 14 ft x 26 in; cutting depth 24 in; lift above ground 19 in
Blade pull / down pressure 22,267 lb / 15,300 lb (base machine)
Transmission Dual-mode, 8 forward / 4 reverse; top forward speed 27.5 mph
Hydraulics Closed-center load-sensing; 52.8 gpm; 3,000 psi maximum
Steering 25° articulation; 24 ft 3 in turning radius
Tires/fuel tank 17.5R25 / 103 gal

Three of these figures need context.

Horsepower depends on gear. The 218 net horsepower rating applies in gears 7–8; in gears 1–3 the net rating is 180 hp. Net horsepower is measured with the air cleaner, alternator, water pump, and muffler in place, so compare net to net when you shop.

Weight turns power into blade pull. Adding the rear ripper and front push plate lifts operating weight from 37,346 lb to 41,667 lb, and Komatsu’s ratings rise to 24,207 lb of blade pull and 18,519 lb of down pressure. The ripper-equipped configuration is the heavier, more aggressive one.

The 14-foot moldboard is about reach. Side shift of 2 ft 8 in each way and a shoulder reach of 6 ft 7 in outside the rear tires let an operator work shoulders and ditch slopes while a wider blade covers more surface per pass.

Komatsu publishes these figures for the model, and option packages vary by machine, so match any unit’s serial number to its build configuration with a Komatsu distributor.

How the GD655-6 Performs in Real Grading Applications

The dual-mode transmission defines this grader’s working character. In lower gears, it uses a torque converter for fine inching and traction; in higher gears, it locks up into direct drive for speed, and anti-stall logic drops back to the converter when load spikes. That means steadier blade speed on finish passes and less lugging when pushing.

The load-sensing hydraulics hold implement speed constant regardless of engine rpm and run several blade functions at once, which matters when feathering a crown while holding grade. Blade-lift accumulators cushion impacts when the edge strikes a manhole or rail crossing, protecting the moldboard, drawbar, and circle. The hexangular cab gives a clear view of the moldboard and front tires, KOMTRAX Level 5 monitoring is standard, and a provision for TOPCON grade control is standard too. That is a mounting provision, not installed hardware, so confirm what a specific machine carries.

Komatsu GD655-6 Used Price: What Does the Market Actually Show?

Among used Komatsu motor graders, the GD655-6 is the 14-foot, 218-hp mid-size option, positioned as a lower-entry-cost alternative to Caterpillar’s 140 series, a contest we cover in the GD655-6’s competition with CAT in the mid-size grader segment.

These are advertised asking prices from active U.S. listings, not completed sales:

Pricing reference Model/year Hours Asking price
2016 Komatsu GD655-6 in Houston 2016 GD655-6 9,288 $75,000
Kirby-Smith Machinery, Oklahoma City (updated Jul 21, 2026) 2017 GD655-6 8,945 $89,000
Machinery Trader listing (updated Sep 28, 2026) 2016 GD655-6 9,800 $98,000

For 2016–2017 units in the 9,000–10,000 hour range, asking prices run from $75,000 to $98,000. Newer machines move the number sharply: a 2018 GD655-6 with 8,503 hours is advertised above $120,000 on Machinery Trader. An asking price is where negotiation starts, not what a machine sells for.

What moves a GD655-6’s value:

  • Hours and model year, read together.
  • Service documentation, including DPF and SCR aftertreatment history on these Tier 4 Final engines.
  • Attachments: ripper, push block, or scarifier.
  • Wear items: tires, cutting edges, and end bits.
  • Structural and mechanical condition, confirmed by inspection.

How Many Hours Are Too Many on a Used GD655-6?

There is no fixed ceiling. Recent GD655-6 auction results on Machinery Trader include units at 3,630 hours (ended Dec 11, 2025), 5,153 hours (Nov 9, 2024), and 14,184 hours (Sep 12, 2025), while active listings cluster between roughly 8,500 and 11,700 hours. Against that spread, 9,288 hours is mid-field for the model: far from low, well short of the high end.

Spread across ten model years, 9,288 hours averages about 930 a year. That figure describes arithmetic, not use. The hour meter counts engine running time, including idling, which is why Komatsu fits auto idle shutdown to limit idle hours. A grader that spent years ripping and pushing wears differently from one that maintained gravel roads, even at identical hours.

Maintenance history is the multiplier. Documented oil and filter changes, hydraulic service, aftertreatment service, and KOMTRAX operating history make 9,288 hours a known quantity. Komatsu Oil and Wear Analysis (KOWA) reports, which track wear metals, fuel dilution, and coolant leaks, show what the hour meter cannot.

Component wear matters more than the meter. A worn circle, loose articulation joint, tired tandem, or hesitant transmission can cost more than the price gap between a 9,000-hour and a 10,000-hour machine. Komatsu offers remanufactured components with same-as-new warranties, so get written distributor quotes on any worn part rather than guessing.

Is the 2016 Komatsu GD655-6 at $75,000 Worth Considering?

Our 2016 Komatsu GD655-6, serial KMTGD032CFA060065, has 9,288 hours and is priced at $75,000. It carries a 14-foot moldboard, multi-shank ripper, push block, circle clutch, differential lock, transmission guard, hydraulic valves, tandem drive, air conditioning, an air suspension seat, beacon, lighting, mirrors, and a defroster fan, and an inspection report is attached. Weigh it on four points:

  • Price: $75,000 sits $14,000 to $23,000 below the $89,000 and $98,000 asking prices on similar-hour units. A gap that size is a reason to read the inspection carefully, not a reason to skip it.
  • Hours: 9,288 is in the middle of the range above, and about 930 hours a year is an average, not a verdict.
  • Attachments: the ripper and push block add the weight and pull ratings noted earlier and the ability to break compacted surfaces. Check the shanks and mounting.
  • Inspection report: read every finding on engine, transmission, hydraulics, circle, drawbar, articulation, and tandems, then request service records, KOMTRAX data, and aftertreatment history.

What Should Buyers Inspect Before Purchasing a Used GD655-6?

  • Identity: match the serial number to paperwork and have a Komatsu distributor confirm build configuration.
  • Hour meter: compare it against service records and KOMTRAX data.
  • Engine and aftertreatment: check fault codes, DPF regeneration history, SCR and DEF system condition, and oil analysis.
  • Transmission: test shifts in manual and automatic modes, including lock-up and torque converter temperature.
  • Hydraulics: look for pump noise, cylinder rod wear, blade drift, leaking hoses, and valve problems.
  • Circle and drawbar: check circle teeth, the six support shoes, slip clutch, and play at the drawbar ball.
  • Articulation joint and tandems: feel for play, and inspect oil level, oil condition, and leaks in each 15.1-gallon tandem housing.
  • Differential lock, final drives, and brakes: engage and listen.
  • Wear items: measure tires, the 6-inch cutting edge, and end bits.
  • Frame and welds: look for weld repairs, cracks, or distortion.

Turn findings into written repair quotes and subtract them from the asking price. An independent inspection by a Komatsu distributor gives that negotiation a factual footing.

Where Does the GD655-6 Make the Most Sense?

The GD655-6 fits road construction and maintenance, access-road and highway shoulder work, site preparation, drainage and ditch grading, and gravel-road upkeep. Its 14-foot blade and shoulder reach suit wide surfaces, the ripper handles compacted material, and the load-sensing hydraulics help on finish passes. Our look at the GD655-6’s efficiency in road construction goes deeper into these uses.

Contractors should match configuration to workload: whether the work needs a ripper, whether the unit is hauled often (41,667 lb with ripper, 8 ft 8 in over the tires), and whether grade-control hardware is installed. For other options, browse our used Komatsu motor graders.

Wrap Up

A used GD655-6 is worth its documented hours, condition, and configuration support. Compare asking prices with similar machines, review the inspection report, and estimate repair costs before you negotiate.

Buy quality, well-maintained used motor graders from CAT, John Deere, and Komatsu at UsedMotorGrader.com. Browse our inventory to compare available machines and find the grader that fits your work.

FAQ

1. What is the Komatsu GD655-6 horsepower?

A: Net horsepower is 218 hp (163 kW) at 2,100 rpm in gears 7–8 and 180 hp in gears 1–3. Gross horsepower is 221 hp.

2. What is the average used price of a Komatsu GD655-6?

A: There is no single figure. Current U.S. asking prices for 2016–2017 units with roughly 9,000–10,000 hours run from $75,000 to $98,000, and lower-hour 2018 units are advertised higher.

3. How many operating hours are acceptable on a used GD655-6?

A: It depends on records and condition. Recent auction results span 3,630 to 14,184 hours, and 9,288 hours on a 2016 unit is mid-range.

4. What should buyers inspect before purchasing a used Komatsu GD655-6?

A: Engine and aftertreatment, transmission, hydraulics, circle and drawbar, articulation joint, tandems, wear items, and frame, plus the serial number, service records, and KOMTRAX data.